Serie-W Niple Unión de Rosca Intercambio Estilo Mariposa (Rosca Hembra)

Atributos

Maximum Operating Pressure	4,000 PSI (276 Bar)
Weight	1.02 lb
Break Quantity	1
Paquete Opcional/Cantidad por Caja	1
Material	Acero
Maximum OD	2" (50.8 mm)
Thread	Hembra NPTF
Body Size	1"
Temperature Range	-40°F to 250°F (-40°C to 121°C)
Burst Pressure	16,000 PSI (1,103 Bar)
Thread Size	1" - 11-1/2
Length	3.15" (80.0 mm)
Hex	1-9/16"

Detalles

Machined components are manufactured using solid steel and brass bar stock.
Stainless steel retaining rings and springs maximize corrosion resistance and extend service life.
Steel componentry is plated using ROHS Compliant Trivalent Chrome.
For steel models, coupler valve sleeve and nipple valve are constructed of brass
Nitrile (Nitrile Rubber) seals are standard, providing a temperature range of -40°F to +250°F (-40°C to +121°C).
Couplings have a TPC-ET back-up ring on the valve sleeve to extend service life.
Nipple valve seal is crimped to improve seal integrity and prolong service life.
External O-ring on plug indicates full connection and acts as a contamination shield in connected mode.
Redundant O-Ring on the coupler body will engage nipple for secondary sealing support.

Although wingstyle couplings are able to connect and disconnect while under pressure, it is recommended that hydraulic power supply be de-energized during connection to ensure operator safety. If it is not possible to de-energize the circuit, operators must be aware of their surroundings to ensure that an attachment or tool does not put them at risk, once hydraulic power is applied during the connection process.
W-series couplings are not recommended for continuous hydraulic impulse applications at rated pressures.

Recursos