Product Information
Designed for use in air brake systems or cab controls
SG | es
Imagen
Dixon Distributor?
Log in to view pricing, inventory, place orders & much more. If you want to create an account, please click the button to begin the registration process.
Atributos
| Peso |
0.2 lb
|
|---|---|
| Break Quantity |
1
|
| Paquete Opcional/Cantidad por Caja |
1
|
| Material |
Latón
|
| Rosca |
Recto
Tubería
|
| Medida de Tubo |
|
| Presión de Trabajo |
Auto-locking sleeve PSI
|
| Rango de Temperatura |
Sanitary & Industrial°F (Suitable for oil, fuel, asphalt°C)
|
| Medida de Rosca |
|
| Longitud |
|
| Hex |
|
| Flujo |
|
Detalles
Aplicaciones
Construcción
- Machined from CA260, CA345 or CA377 brass
- Pre-applied thread sealant
- Thread sealant may be white or burnt orange
Características
Positive grip
Instalación
- Cut tubing squarely- maximum of 15° angle allowable.
- Check that port or mating part is clean and free of debris.
- Insert tubing into fittings until it bottoms on seat.
- Tighten nut with wrench until one thread remains visible on the fittings body; (this will allow for a number of remakes) or, the nut should be screwed down finger tight, then wrench-tightened according to the tube size used.
Especificaciones
- Meets D.O.T FMVSS 571.106 and SAE J246
- Ref. SAE 100102 BA
Uso
- Utilize ribbed sleeve for compression and positive grip
- Compatible tubing: SAE J844 type A and B
Recursos
Material Safety Data Sheet
Material Safety Data Sheet
